1. Avoid being deceived

建設公司的品控人員在驗收產品的時候，先就是根據自己的訂單與廠家發過來的實體產品是否一致，如果不一致就需要與廠家技術人員進行退換處理，因為發電機組的各種原材料是非常好的，有些發電機組生產商為了省錢的廠家就會偷工減料，把重要的材料換成一些比較不好的材料來充當質量好的發電機組。

When the quality control personnel of the construction company inspect the products, they first check whether their orders are consistent with the physical products sent by the manufacturer. If they are not consistent, they need to return or exchange them with the manufacturer's technical personnel. Because the various raw materials of the generator set are very good, some generator set manufacturers may cut corners in order to save money, Replace important materials with inferior ones to serve as high-quality generator sets.

1.質量是否合格

1. Whether the quality is qualified

發電機組的體積非常大，制造價格也是非常大，為了保證發電機組的出廠質量，發電機組整體應該是沒有外形損壞的。所以公司品控人員可以要求發電機組廠家在運輸?shù)倪^程中小心點，盡量使用吊裝起重機對其搬運，避免發生不需要的碰撞。同時也要注意隨后的調試工作，這關乎發電機組的供電能力是否符合出廠標準。

The volume of the generator set is very large, and the manufacturing price is also very high. In order to ensure the factory quality of the generator set, the overall appearance of the generator set should be undamaged. So the company's quality control personnel can require the generator set manufacturer to be careful during transportation and try to use a lifting crane to handle it as much as possible to avoid unnecessary collisions. At the same time, attention should also be paid to the subsequent debugging work, which is related to whether the power supply capacity of the generator unit meets the factory standards.

3.進行個別整體抽查

3. Conduct individual overall spot checks

企業一般都是購買兩臺發電機組以上，如果發電機組整體上沒有發現問題，在以后的使用過程中，由于一些原材料的質量出現的問題，那么后續的退換是非常困難的，所以企業有需要組織品控人員對個別的發電機組進行抽查，這也是驗收的重要點之一。

Enterprises usually purchase two or more generator sets. If no problems are found with the generator sets as a whole, it will be very difficult to return or exchange them in the future due to quality issues with some raw materials. Therefore, enterprises need to organize quality control personnel to conduct spot checks on individual generator sets, which is also an important point of acceptance.